An Abu Ambassadeur 7000i Brake Plate.
ABU Part No 1138493.…
ABU Ambassadeur 7000i C3 CT Right Side Plate in red to fit later models. Supplied complete with IAR…
ABU Ambassadeur 7000i C3 CT Left Side Plate in red to fit later models. Supplied bare with o…
Abu Ambassadeur Domed Spool Shim. The small brass curved shim that fits behind the gear side spool bearing.
Replaces ABU…
Abu Ambassadeur 6501 left hand wind Grey Brake Plate. To fit later C3 models with ultracast type spools.…
6501 left hand wind Silver Left (Gearbox) Side Plate to fit reels with ultracast spool system. Supplied complete…
Abu Ambassadeur 5501/6501 Drive Shaft (the part that holds the drag washers and main gear) to fit left hand wind…
An ABU Ambassadeur 5501/6501 left hand wind 5.3:1 Ratio Main and 4-slot Pinion Gear Set to suit models with…
Abu Ambassadeur Clicker Switch Connecting Pin. This part attaches the spring to the clicker slider switch.
ABU Part No:…
Abu Ambassadeur Clicker Switch Spring. This part locates in the plastic slider switch in the domed side plates.
ABU…
ABU Ambassadeur 5501/6501 C3 Pinion Gear Yolk.
ABU part No 21875.
…
Abu Ambassadeur 5501/6501 Position Holder - to fit later left hand wind C3 models.
ABU part No 25994.
…
Super sharp classic aberdeen finished in anti-corrosive nickel. The long shank makes baiting easy and also aids bait presentation.…
An affordable range of Zircon Carbide (ZrC) tip guides to suite our ZDHG and ZSLG guides. With stainless…
An affordable range of single-leg Zircon Carbide (ZrC) rod guides. With stainless steel frames and an attractive gunsmoke…
An affordable range of single-leg Zircon Carbide (ZrC) rod guides. With stainless steel frames and an attractive gunsmoke…
A yellow no frills co-polymer monofilament - can be used as a leader or mainline. Exceptional value for…
A yellow no frills co-polymer monofilament - can be used as a leader or mainline. Exceptional value for…
A yellow no frills co-polymer monofilament - can be used as a leader or mainline. Exceptional value for…
Pre-made 4 inch long tailed loop wires ideal for use with DCA, Breakout and a variety of moulds designed…