New Products

Fuji BLVOG Rod Guides - 16mm

Fuji BLVOG single leg guides are perfect for light action rods that would be adversely affected by heavier three…

Model

BLVOG 16

Fuji BPLT Tip Guide - Size 16 - 6.0 mm

The Fuji BPLT hardloy tip guide has a light brown Alumina Oxide liner with a quoted hardness of 1200…

Model

BPLT 16/6

Fuji BPLT Tip Guide - Size 16 - 4.5 mm

The Fuji BPLT hardloy tip guide has a light brown Alumina Oxide liner with a quoted hardness of 1200…

Model

BPLT 16/45

Stainless Steel Replacement ABU / Shimano Bearings 3x10x4 ABEC3

A pair of Stainless Steel Replacement ABU / Shimano Bearings (3x10x4) - rated to ABEC3.

Pre lubricated with oil.

PER PAIR.

To…

Model

BBS-S-A2(3)

Economy Replacement ABU and TF Gear IAR Bearing

This is an economy one-way bearing to replace the stock Instant Anti Reverse Bearing pressed into ABU 5000/6000 series…

Model

HF1008

Mini Grip Bags - 38mm x 64mm

Mini Grip resealable bags, ideal for holding various items such as swivels, crimps and rigs.

Size: 38mm x…

ABU Flat Sided Micro Stainless Steel Fishing Knobby

A Micro Stainless Steel Fishing Knobby Mag Brake Conversion Kit for Flat sided Abu 5000, 6000 or 7000 series…

Model

bdtk2

Stainless Steel ABU Endcap Drilling Tool

This is a useful tool for those of you that fit centre mags and makes it much easier to…

Carbontex Drag Washer Kit - Mitchell 600 Multiplier Reels

The new Carbontex drag washers from Smooth Drag are a new generation of carbon fibre drag washers. The high…

Model

M600

Carbontex Drag Washer - 29.00 x 8.60 x 0.76mm

The new Carbontex drag washers from Smoooth Drag are a new generation of carbon fibre drag washers. The high…

Model

CLW-46

Replacement Stainless Steel ABU Worm Drive Bearing (each)

A single replacement ABU Worm Drive Bearing in 440 Stainless Steel which fits a range of ABU models.

…

Model

BBS-S-Worm

Shimano TSMII Stainless Steel Left Side Thumbscrews

A set of four Shimano TSMII Stainless Steel Left Side Thumbscrews. These custom thumbscrews look great and make…

Model

TSMIISS-L

Rocket Reel Co Stainless Steel End Cap

These new domed end caps are manufactured in marine grade 316 stainless steel and have ultra fine diamond knurling.…

Model

TGEC-SS

ABU Reel Lube Bottle

A dispensing bottle of ABU reel oil. As provided with a new ABU reel but a full bottle…

Carbontex Drag Washer - 26.45 x 8.35 x 1mm

The new Carbontex drag washers from Smoooth Drag are a new generation of carbon fibre drag washers. The high…

Model

CLW-32

Replacement Shimano TSM II Screw Set

A replacement Shimano TSM II Stainless Steel Side Plate Screw Set. Replaces all of the main side plate…

Model

TSMscrews

Daiwa Sealine X Drag Seal O-Ring - Single o-ring

Replacement Drag Seal O-ring to fit various Daiwa Sealine X models.

This part is situated at the top…

Model

F65-7801

Replacement Shimano TSM II Strike Ball

A replacement Shimano TSM II Strike Ball, the small stainless steel ball bearing that fits into the drag adjuster…

Model

TGT0152

ABU Left Hand Wind Crossover Conversion Kit - Red

This ABU Left Hand Wind Crossover Conversion Kit replaces the current fittings on your Ambassadeur 4501, 5501 and 6501…

Model

cross-red

Fin-Nor AHAB ABS20 Line Roller Bearing

A single replacement line roller bearing which replaces the standard Fin-Nor part on the AHAB ABS20 spinning reels. …

Model

BBS-S-LR5