Spool Shaft – FathomII 15 Star Drag #071 FTHII15SD

Spool Shaft – FathomII 15 Star Drag Reels.

Penn part No 071 FTHII15SD, Pure Part No 1516154.

Please check your schematic…

Model
1516154
Daiwa SL20SH and SL30SH AR Pawl Spring #E31-6502

Anti-reverse pawl spring to fit Daiwa SL20SH and SL30SH.

This part is fitted to the reels anti-reverse pawl.

Daiwa…

Model
E31-6502
Daiwa SL20SH and SL30SH Clutch Spring #F02-0301

Clutch (freespool) Spring to fit Daiwa SL20SH, SL30SH and other Daiwa models.

This part is fitted to the…

Model
F02-0301
Genuine Daiwa SL20SH and SL30SH Handle Fixing Kits

Genuine Daiwa Handle Fixing Kits to fit the Daiwa SL20SH and SL30SH reels.

This set includes the following Daiwa…

Model
B86-2301
Worm Shield – Penn Fathom II 15 LW #50 FTHII15LW

Worm Shield to fit Penn Fathom 15 LW Reels - Penn part No #50 FTHII15LW (Pure part No 1488774).

Please…

Model
1488774
Anti Reverse Collar – Fathom II LW Models

Anti Reverse (one-way) Bearing Collar to fit Fathom II 15LW, 20LW and 30LW Reels. Also fits other models.

Penn…

Model
1516200
Anti Reverse Bearing – Fathom II LW Models

Anti Reverse (one-way) Bearing to fit Fathom II 15LW, 20LW and 30LW Reels.

Penn part No 98B FTHII30LW - Pure…

Model
1488764
Line Guide – Penn Fathom II LW 15 20 25 #046 FTH20LW

Line Guide to fit Penn Fathom II Level Wind Reels - Penn part No 046 FTHII20LW.

Fits the following:

Fathom II…

Model
046 FTH20LW1488796
Replacement ABU Drag Spacing Shim - #3915 #3904

A replacement Copper Drag Stack Spacing Shim to fit many older 4000 to 6000 ABU Ambassadeur models from the…

Model
3915/3904
Drive Spacer Washers 0.2 – Penn ABU Daiwa Reels

A stainless steel 8x12x0.2mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…

Model
dshim02
Drive Spacer Washers 0.1 – Penn ABU Daiwa Reels

A stainless steel 8x12x0.1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…

Model
dshim01
Replacement Abu Ambassadeur Drive Shaft Shim - Brass

A Replacement ABU Ambassadeur Drive Shaft Shim. Made from brass this is a slightly harder wearing version of the…

Model
5189u
ABU Ambassadeur Drag Stack Spacing Washer - #3904

An ABU Ambassadeur Stainless Steel Drag Stack Spacing Washer to fit many older 4000 to 6000 models from the…

Model
3904
ABU Ambassadeur 4500 to 6500 Main Gear - #4528

An ABU Ambassadeur Main Gear to fit many older 4000 to 6000 models from the 70s.

ABU Part No 4528.…

Model
4528
Abu Ambassadeur Single Leaf Anti Reverse Pawl

An Abu Ambassadeur Single Leaf Anti Reverse Pawl as fitted to a number of the small Ambassadeurs.

ABU…

Model
22089
Carbontex Washers - Shimano Spinners #16740 and #16742

The new Carbontex drag washers from Smooth Drag are a new generation of carbon fibre drag washers. The high…

Model
16740
Carbontex Washers - Shimano Spinners #16742 (3)

The new Carbontex drag washers from Smooth Drag are a new generation of carbon fibre drag washers. The high…

Model
16742-3
Abu Svartzonker 5501/6501 LHW Main and 4 Slot Pinion Gear Set

An ABU Ambassadeur Svartzonker 5501/6501 left hand wind 5.3:1 Ratio Special Main and 4-slot Pinion Gear Set. Produced…

Abu Ambassadeur 5500 C3 Flat Profile Gold Spool (bare)

Gold colour flat profile spare spool to fit most ABU Ambassadeur 5000 and 5500 reels including Elites, Mag Elites…

Model
5500gld
Anodised Colour Monomag Adjuster - 5mm Orange

These anodized aluminium monomag adjusters are threaded to fit on a 5mm magnet shaft and can be used on…

Model
Orange5
Result Pages:
Manufacturers
We Accept