Daiwa Sealine SHA and SHV Brass Knobby Mag Conversion

A Tournament Knobby Mag Brake Conversion Kit for Daiwa SLX20SHA, SLX30SHA, SLX20SHV, SLX30SHV, SL20SH-A and SL30SH-A reels. This…

Model
bdtk53
Daiwa Sealine X Drag Seal O-Ring

Replacement Drag Seal O-ring to fit various Daiwa Sealine X models.

This part is situated at the top…

Model
F65-7801
Daiwa SL20SH / SL30SH Knobby Mag Conversion

A Knobby Monomag conversion for Daiwa SL20SH and SL30SH reels.  This kit is of the screw in type and…

Model
bdtk08
Deluxe Diamond Wrap Shrink Tube - Blue

This deluxe shrink tube is will finish off any rod perfectly and is not all like the standard shrink…

Model
ST14
Deluxe Diamond Wrap Shrink Tube - Green

This deluxe shrink tube is will finish off any rod perfectly and is not all like the standard shrink…

Model
ST15
Deluxe High Grip Shrink Tube - Black 25mm

This Deluxe High Grip Textured Shrink Tube is the Rolls Royce of shrink tubes and will finish off any…

Model
ST7a
Deluxe High Grip Shrink Tube - Black 30mm

This Deluxe High Grip Textured Shrink Tube is the Rolls Royce of shrink tubes and will finish off any…

Model
ST7
Disposable Mixing Sticks - Pack of 10

A pack of 10 Disposable Mixing Sticks. Ideal for mixing up small quantities of 2 pack finish or…

Drive Spacer Washers 0.1 – Penn ABU Daiwa Reels

A stainless steel 8x12x0.1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…

Model
dshim01
Drive Spacer Washers 0.2 – Penn ABU Daiwa Reels

A stainless steel 8x12x0.2mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…

Model
dshim02
Eco Replacement Penn Fathom 15 LD Drive Shaft Bearing

Eco Stainless Steel Replacement Penn Fathom 15 LD Drive Shaft Bearing. Fits both single and two-speed models.

Made from…

Model
BBS-E-DR6
Eco Replacement Penn Fathom 15 LD Pinion Bearing

Eco Stainless Steel Replacement Penn Fathom 15 LD Pinion Bearing. Fits both single and two-speed models.

Made from 440…

Model
BBS-E-PIN5
Eco Replacement Penn Fathom Level Wind Models Spool Bearings

A pair of Economy Spool Bearings to fit all Penn Fathom Level Wind Models - made from 440 Stainless…

Model
E-P5
Eco Replacement Penn Fathom SD Lower Drive Bearing

Eco Stainless Steel Replacement Penn Fathom SD Lower Drive Bearing. Please note this is for Star Drag models…

Model
BBS-E-DR13
Eco Replacement SS Penn 525MAG 2 Pinion / Lower Drive Bearing

Economy Replacement Penn 525MAG 2 Pinion / Lower Drive Bearing - manufactured in 440 stainless steel. Replaces the…

Model
BBS-S-PIN1C
Eco Replacement SS Penn 525MAG2 Fathom Top Pinion Bearing

Economy Replacement SS Penn 525MAG2 Fathom Top Pinion Bearing - manufactured in 440 Stainless Steel. Replaces the bearing…

Model
BBS-S-PIN2C
Eco Replacement Stainless ABU Spool Bearings (4x9x4)

A pair of Eco Replacement ABU Spool Bearings (4x9x4) manufactured from stainless steel - ABEC3.

PER PAIR.

To fit the…

Model
BBS-E-A6
Eco Stainless Complete Bearing Set - Penn 975LD

Complete Economy Replacement Bearing Set for a Penn International 975LD - Stainless steel.

Replaces the following bearings:

Key No26…

Model
BBS-S-P4(E)
Eco Stainless Steel Bearings - Trinidad 40 and 50

Replacement Economy Stainless Steel Bearings to fit the Shimano Trinidad 40 and 50 reels. These are a direct replacement…

Model
BBS-S-TN40(E)
Eco Stainless Steel Clutch Bearing - Penn Fathom 15 Lever Drag

An Economy Replacement Stainless Steel Clutch Bearing for Penn Fathom 15 single and two-speed Lever Drag reels.

Manufactured from 440…

Model
BBS-E-LD3
Manufacturers
We Accept