Replacement C Clips to fit ABU 4500 to 10000 Driveshafts

Pack of 5 "C" Clip for ABU Multipliers, replaces ABU part numbers 4490 and 8846, which sits on top…

Model
4490/8846
Replacement C Clips to fit Daiwa 7HT Driveshafts

Pack of 5 "C" Clip for Daiwa 7HT Multipliers, replaces Daiwa part number B33-9801, which sits on top…

Model
B33-9801
Replacement C Clips to fit various Daiwa Reels - #320-7601

Pack of 5 "C" Clips which are used on a number of Daiwa models, including as the Eccentric retainer…

Model
320-7601
Replacement Ceramic Hybrid Pinion Bearing - Seigler SG

A replacement Stainless Steel Hybrid Ceramic Ball Bearing Pinion Bearing for a Seigler SG Lever Drag reel.

Rated at ABEC5…

Model
BBS-S-SE103
Replacement Daiwa 7HT Mag Handle Knob Bearing

A replacement roller bearing which replaces the standard Daiwa 7HT and ST Handle Knob Bearing, Daiwa part number 6G469001.…

Model
BBS-S-7hthan
Replacement Daiwa 7HT Mag Side Plate Pinion Bearing

A replacement roller bearing which replaces the standard Daiwa 7HT and ST Side Plate Pinion Bearing, Daiwa part number…

Model
6G430901
Replacement Daiwa 7HT MAG Turbo Pinion Bearing

Replacement Daiwa 7HT MAG / Turbo Pinion Bearing - Stainless steel.

Replaces the pinion roller bearing that is located in…

Model
EB14
Replacement Daiwa 7HT Std Turbo MAG Drive Shaft Bearing

Replacement Daiwa 7HT Std Turbo MAG Drive Shaft Bearing - Stainless steel.

Replaces the top drive shaft roller bearing situated…

Model
EB15
Replacement Handle Nut for ABU Ambassadeur Reels

A replacement brass handle nut to fit ABU 4500, 5500 and 6500 Multipliers, replaces ABU part number 15359 which…

Model
bdt71R
Replacement Handle Nut for Left Handed ABU Ambassadeur Reels

A replacement brass handle nut to fit various left hand wind ABU Multipliers (6501 etc), replaces ABU part number…

Replacement Penn 525 USA Brake Magnet

Penn 525 USA Replacement Brake Magnet.

These magnets are not supplied individually as a part by Penn and are…

Replacement Penn 525 USA Brake Magnet - 5 Pack

Penn 525 USA Replacement Brake Magnet.

These magnets are not supplied individually as a part by Penn and are…

Replacement Shimano Line Roller Bearing - No 1

A single replacement line roller bearing which replaces the standard Shimano part on the reels below.

SINGLE BEARING.

To fit…

Model
BBS-S-LR1
Replacement Shimano Line Roller Bearing - No 2

A single replacement line roller bearing which replaces the standard Shimano part on the reels below.

SINGLE BEARING -…

Model
BBS-S-LR2
Replacement Shimano Line Roller Bearing - No 3

A single replacement line roller bearing which replaces the standard Shimano part on the reels below.

SINGLE BEARING -…

Model
BBS-S-LR3
Replacement Shimano Line Roller Bearing - No 4

A single replacement line roller bearing which replaces the standard Shimano part on the reels below.

SINGLE BEARING

To fit…

Model
BBS-S-LR4
Replacement Shimano Line Roller Bearing - No 5

A single replacement line roller bearing which replaces the standard Shimano part on the reels below.

SINGLE BEARING -replaces…

Model
BBS-S-LR6
Replacement Shimano Oscillator Bearing - RD11018

A single replacement oscillator bearing which replaces the standard Shimano part.

SINGLE BEARING -replaces Shimano Part No RD11018.

To fit…

Model
RD11018
Replacement Shimano Tekota 600 Upper Drive Shaft Bearing

Stainless Steel Replacement Shimano Tekota 600 Upper Drive Shaft Bearing.

Made from Stainless Steel these bearings are supplied pre-greased -…

Model
BBS-S-DR10
Replacement Shimano TLD15 Bearing Set - Early Models

A stainless steel replacement Shimano TLD15 Bearing Set to fit early models (1987 to mid 1990s) which are usually…

Model
BBS-S-TLD15E
Manufacturers
We Accept