The new Carbontex drag washers from Smoooth Drag are a new generation of carbon fibre drag washers. The high…
A Custom Akios Mag Adjuster Knob manufactured from powder coated aluminium.
The standard mag adjuster knob fitted to these reels…
A precision engineered Standard Length Brass Pinion Support Pin which fits in the driveshaft of all Daiwa 7HT models.…
Replacement Side Plate Locating Pin (Pin A) to fit various Daiwa Saltist models.
This part fits in…
Replacement Drag Seal O-ring to fit various Daiwa Sealine X models.
This part is situated at the top…
Replacement Drag Seal O-ring to fit various Daiwa Sealine X models.
This part is situated at the top…
Anti-reverse pawl spring to fit Daiwa SL20SH and SL30SH.
This part is fitted to the reels anti-reverse pawl.
Daiwa…
Clutch (freespool) Spring to fit Daiwa SL20SH, SL30SH and other Daiwa models.
This part is fitted to the…
A stainless steel 8x10x0.5mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
A stainless steel 8x10x1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
A stainless steel 8x11x1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
A stainless steel 8x12x0.1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
A stainless steel 8x12x0.2mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
An economy replacement carbon fibre swept Paddle Handle to fit the likes of ABU Ambassadeur 4500 to 6500, Daiwa…
This is an economy one-way bearing to replace the stock Instant Anti Reverse Bearing pressed into ABU 5000/6000 series…
Economy Replacement Bearings for Daiwa 7HT Turbo reels - a direct replacement for the standard ones supplied with your…
This is an EWC1010 one-way bearing to replace the stock Instant Anti Reverse Bearing fitted to Tronix Pro Envoy…
Genuine Daiwa Handle Fixing Kits to fit the Daiwa 7HT Original and the 7HT Turbo.
This set includes the…
Genuine Left Sideplate Screw to fit the Daiwa Millionaire 7HT Mag.
Daiwa part number E31-7401.
PER SCREW
Please check your schematic…
Genuine Daiwa Handle Nut to fit the Daiwa Millionaire 7HT Magnafuge.
Daiwa part number H07-0901.
Please check your schematic to…