These nylon washers are a simple way to prevent damage to the finish of your Ambassadeur right side plates…
- Model
- arw-10
A stainless steel 8x10x0.5mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
- Model
- dnshim10-05
A stainless steel 8x12x0.1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
- Model
- dshim01
A stainless steel 8x12x0.2mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
- Model
- dshim02
A stainless steel 8x11x1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
- Model
- dnshim11-1
A stainless steel 8x10x1mm spacer shim for use on reels with an 8mm drive shaft. Very useful for…
- Model
- dnshim10-1
This set of three nylon washers are a simple way to prevent damage to the finish of your Ambassadeur…
A Replacement ABU Ambassadeur Drive Shaft Shim. The small copper shim that fits on the Brake Plate Post, under…
- Model
- 5189
A replacement Copper Drag Stack Spacing Shim to fit many older 4000 to 6000 ABU Ambassadeur models from the…
- Model
- 3915/3904
These nylon washers are a simple way to prevent damage to the finish of your Ambassadeur left side plates…
- Model
- alw-10
These nylon washers are a simple way to prevent damage to the finish of your Ambassadeur right side plates…
- Model
- arw-10
A Replacement ABU Ambassadeur Drive Shaft Shim. Made from brass this is a slightly harder wearing version of the…
- Model
- 5189u
A Replacement ABU Ambassadeur End Cap Shim - 0.3mm thick.
Replaces ABU Part No 20917.
…
- Model
- 20917
ABU Ambassadeur Replacement Magtrax Brake Magnets.
These magnets are not supplied individually as a part by ABU and are…
Custom replacement ABU Ambassadeur Drag Spring Washers. These replace the standard curved steel washers that fit over the Drive…
- Model
- 5131custom
Abu Ambassadeur Clicker Switch Connecting Pin. This part attaches the spring to the clicker slider switch.
ABU Part No:…
- Model
- 12649
These Abu Ambassadeur Tournament Spool Shims have been custom made to our own, improved specifications and are based on…
A Handle Thrust Washer to fit the ABU 5000 and 6000 series and the Daiwa 7HT Original, Turbo and…
- Model
- 150-9001
A replacement brass handle nut to fit ABU 4500, 5500 and 6500 Multipliers, replaces ABU part number 15359 which…
- Model
- bdt71R
ABU Ambassadeur Pinion Yolk Locking Clip - fits various models.
ABU Part No: 8845.…
- Model
- 8845
Displaying 1 to 20 (of 102 products)